aggregatecrushing on "Crusher Notes"

aggregatecrushing — Mon, 08 Aug 2016 06:00:06 +0000

In the crusher during operation should pay special attention to what is happening in. A. crusher bearing temperature is too high. Details of Remedy:1) First, to check whether the grease reduction; 2) in terms of standard grease should be chock full of 50% volume;

3) To timely cleaning bearings, replace grease; 4) If badly worn, replace bearings.

B. the machine during operation Quarry Crusher Business Opportunity in Tanzania
, the internal cavity crusher percussion sound generated very intense. Detailed approach:1) should immediately turn off the power crusher, parking and clean up the crushing chamber. Is there not be broken material into the crushing chamber.

2) the machine during operation will have a huge vibration, hammer and fastening gap between the liner and the liner inspection; whether liner wear off if the reason.Replace 3) broken pieces. crusher discharge size in the course of an excessive solution:
Detailed approach:

1) should counterattack by adjusting the front and rear frame gap or replace badly worn liner plate and hammer;

2) Furthermore, the counterattack rack position is adjusted so that both sides can achieve a relatively rack lining clearance to ensure the expected size.

DavidCadogan.ca Forums Topic: Crusher Notes

aggregatecrushing on "Crusher Notes"