<p>The so-called crushing balance of the Construction Waste Crusher refers to the balance of the microfine process of the crusher during the crushing process and the fine powder agglomeration process. SBM below to break the balance of the concept mentioned in the two processes, to analyze how they are concrete implementation.</p>
<p>Vibratory grinding is the most commonly used micro-crusher in the laboratory, in order to obtain the ideal, fully crystalline micro-body had to use vibration grinding. Construction Waste Crusher is broken in order to a whole, closely integrated things separated into a lot of tiny units, but in the secondary particles broken into a single micro-crystal at the same time, there will be completely opposite to the role of broken, That is, the cohesion of microparticles. It means that for the chemical composition of a single secondary particles, the secondary particles refers to the original grain size and primary particles, a primary particle size refers to the original particle size is small, after a certain period of continuous grinding, will become a medium size Secondary particles, which is what we call broken balance.</p>
<h2>There are two reasons for the crushing balance of the cone crusher</h2>
- First, the powder stress occurs in the state of the state of the particulate aggregates due to the sliding between the particles, the elastic deformation of the particles themselves and the grain surface of the lattice defects, grain boundary irregular structure of the powder produced by the role of relaxation Fragmentation is reduced.
- Second, the grain coagulation Once the surface of the powder refinement of the surface of each other gravitational force, water film cohesion, mechanical pressure, friction heat, etc., will produce particles of agglomeration. The larger the grain area of the powder, the easier it is to agglomerate. Moreover, the crystallization of small, active energy of the ion crystal is also easy to agglomerate.