1. Spiral tensioning or hydraulic tensioning belt conveyor slipping When the screw tensioning or hydraulic tensioning belt conveyor slips, the tensioning stroke can be adjusted to increase the tensioning force. However, sometimes the tensioning stroke is not enough and the belt is deformed. At this time, the belt can be cut off and re-vulcanized.
2. Longer tensioning stroke is required when using nylon belt or EP. When the stroke is not enough, it can be re-vulcanized or the tensioning stroke can be increased to solve it.
3, the weight of the belt tensioning Gypsum Mining Process Machine Price belt slipping using the belt tensioning device of the belt tensioner can be added when the belt slips to solve the problem, added to the belt does not slip. But it should not be added too much, so as not to cause the belt to bear unnecessary excessive tension and reduce the life of the belt.
Differentiation of deviation of belt conveyor
There are many reasons for the deviation of the belt conveyor, which need to be handled differently according to different reasons
1.Adjust the supporting roller group
2.Install the self-aligning idler group
3. Adjustment of the tension position The adjustment of the belt tension position is a very important part of the belt conveyor deviation adjustment.
4. Adjusting the position of the driving roller and the redirecting roller The adjustment of the driving roller and the redirecting roller is an important part of the belt deviation adjustment.
5. Adjusting the deviation of the two-way running belt conveyor.